At+Fcq Copy Quality Checking; At+Fcr Capability To Receive - Siemens MC35 Command Set

AT Command Set

3.6 AT+FCQ Copy Quality Checking

Test command This command controls Copy Quality checking when receiving a fax.
AT+FCQ =? Response
(list of supported copy quality checking <cq>s)
OK
Parameter
See write command
Read command Response
<cq> OK
AT+FCQ?
Parameter
See write command
Write command Response
OK
AT+FCQ =<cq>
Parameter
<cq>
Reference Note
EIA PN-2388 Used for for Faxclass 2 only.

3.7 AT+FCR Capability to receive

Write command Response
OK
AT+FCR=<cr>
Parameter
<cr>
Reference Note
EIA PN-2388 Used for Faxclass 2 only
MC35_ATC_01_V05.00
0 No copy quality checking. The ME will generate Copy Qual-
ity OK (MCF) responses to complete pages.
1 ME can check 1-D phase data. The connected application
must check copy quality for 2-D phase C data
ME will not receive message data. This can be used when
0
the application has insufficient storage. The ME can send
and can be polled for a file.
1 ME can receive message data.
Page 52 of 256 15.07.2002