Troubleshooting; 2-5-8.1 Windows 7 / Windows 8 Will Not Recognize The Gt-3 Printer Driver After You Connect To Your Pc With Usb Cable - Brother GT-3 Series Service Manual

2. Setting up GT-3 Series

2-5-8. Troubleshooting

Confirm the following topics when you need to troubleshoot in PC setup.
2-5-8-1. Windows 7 / Windows 8 will not recognize the GT-3 Printer Driver after you
connect to your PC with USB cable
Issue:
The following may occur when you install the Brother GT-3 Printer Driver for the first time on your PC. If
the installation fails, Windows 7 / Windows 8 sometimes regard GT-3 as an "Unspecified Device".
If this is the case, you can see the error message at the right bottom of your desk top. (The icon and
message may differ depending on your Windows version).
Left Click on; Click here for details, in the pop-up window.
The following window appears. Close out of it to continue the installation
Open the Control Panel and click on the Devices and Printers icon.
You will see that the GT-3 is shown in the "Unspecified" category as seen on the following page. (The
icon and message may differ depending on your Windows version.)
(Following to the next page)
GT-3 Series
54