Moving The Machine - Kyocera FS-C1020MFP User Manual

Contents Previous
Top Page > Maintenance > Moving the Machine

Moving the Machine

This section provides cautions that you must follow when moving the machine both short and long
distances.
●
●
●
●
Repack the machine in its original packing materials when moving it a long distance.
Be sure to disconnect all cables from the machine before transporting it.
●
The machine is a precision piece of machinery. Be sure to handle it carefully when moving it.
●
Make sure to move the machine horizontally. Take extra caution when carrying the machine up or down stairs.
●
If tray 2 is installed, remove it from the machine, and move them separately.
●
Do not hold onto the tray area when lifting the machine.
●
Related topics
Moving over a Short Distance
Moving over a Long Distance
Top
Copyright © 2009
Next
The machine weighs approximately 30.0 kg (66.2 lb.). When moving the machine, use the inset grips on
both sides, and lift slowly in pairs. The machine will break or cause injury if dropped.
Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you
should take care that the power cord will not be damaged under the machine.
When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
When moving the machine after use, do not take out any of the toners, nor the waste toner bottle to
prevent toner spill inside the machine.
Previous Next
Settings