Starting The Masshunter Data Acquisition Software - Agilent Technologies Revident LC/Q-TOF System User Manual

4 Basic Operation

Starting the MassHunter Data Acquisition Software

Starting the MassHunter Data Acquisition
Software
The instructions below include the following assumptions:
• The hardware and software are installed.
• The instrument is configured. For information on configuring the instrument,
• The LC modules and the LC/Q-TOF are turned on, but the LC pump is not
After installation, all the Agilent MassHunter Workstation Software icons appear
on the desktop.
To start the MassHunter Data Acquisition program,
1 Double-click the Control Panel icon on your desktop, or select Windows Start
2 In Control Panel, select an instrument and click Launch to open the project in
52
refer to the MassHunter Control Panel help.
running.
> Agilent Technologies > Control Panel.
Acquisition. For more information, refer to the MassHunter Control Panel help
or the Introduction Workbook.
Agilent Revident LC/Q-TOF System User Guide