At+Fphcto Dte Phase C Response Timeout - Siemens Brodersen MC55 AT Command Manual

12.20

AT+FPHCTO DTE Phase C Response Timeout

The timeout value
<tout>
when transmitting in Phase C. When timeout is reached, the DCE assumes that there are no more pages or doc-
uments to send.
Syntax
Read Command
AT+FPHCTO?
Response(s)
<tout>
OK
Write Command
AT+FPHCTO=<tout>
Response(s)
OK
If error is related to ME functionality
ERROR
Reference(s)
EIA PN-2388
Parameter Description
(num)
<tout>
Timeout
Value in 100ms units
(P)
0...30 ...255
Note
• Used for Fax Class 2 only.
MC55_ATC_V04.00
Confidential / Released
determines how long the DCE will wait for a command after reaching the end of data
Page 322 of 475
PIN ASC0 ASC1 MUX1
! % ! %
MUX2 MUX3 Charge
! ! ! !
Last
!
3/17/06