At^smong Gprs Monitor - Siemens Brodersen MC55 AT Command Manual

8.10

AT^SMONG GPRS Monitor

The command supplies GPRS specific cell information. There are two ways to retrieve the informa-
AT^SMONG
tion: once on request by using the execute command or automatically every
write command. To stop the periodic presentation type "AT" or "at".
Syntax
Test Command
AT^SMONG=?
Response(s)
^SMONG:(list of supported <table>s), (list of supported <period>s)
OK
ERROR
+CME ERROR
Exec Command
AT^SMONG
Response(s)
GPRS Monitor
Cell Info Table (see: Section 8.10.1,
OK
ERROR
+CME ERROR
Write Command
AT^SMONG=<table>[, <period>]
Response(s)
^SMONG: GPRS Monitor
Cell Info Table (see: Section 8.10.1,
OK
ERROR
+CME ERROR
Reference(s)
SIEMENS
Parameter Description
(num)
<table>
1
(num)
<period>
Display period in seconds
If is omitted the cell data will be presented only once on a single line (as if Execute command was
<period>
issued).
If is given, the cell data will be listed repeatedly on 10 data lines. Every 10
<period>
the header, simply to repeat the column titles.
1...100
MC55_ATC_V04.00
Confidential / Released
AT^SMONG Cell Info
AT^SMONG Cell Info
PIN
%
Cell Info Table
Page 182 of 475
<period>
Table)
Table)
ASC0 ASC1 MUX1 MUX2
% % % %
seconds by using the
MUX3 Charge Last
% ! ! !
th
data line is followed by
3/17/06