At+Fbor Query Data Bit Order - Siemens Brodersen MC55 AT Command Manual

12.4

AT+FBOR Query data Bit Order

This command queries the bit order for the receive mode. The mode is set by the ME depending on the selected
Service Class, see "AT+FCLASS
Syntax
Test Command
AT+FBOR=?
Response(s)
(list of supported <bor>s)
OK
Read Command
AT+FBOR?
Response(s)
<bor>
OK
Write Command
AT+FBOR=<bor>
Response(s)
OK
Reference(s)
EIA PN-2388
Parameter Description
(num)
<bor>
bit order modes
0
[1]
Note
• Used for Fax Class 2 only.
MC55_ATC_V04.00
Confidential / Released
Fax: Select, read or test service class".
PIN
!
Direct bit order for both Phase C and for Phase B/D data.
Reversed bit order for Phase C data, direct Bit Order for Phase B/D data.
Page 306 of 475
ASC0 ASC1 MUX1 MUX2
% ! % !
MUX3 Charge Last
! ! ! !
3/17/06