Table of Contents
Advertisement
7.24
AT+CSNS Single Numbering Scheme
The
command enables the ME to accept incoming calls when no bearer capability information is pro-
AT+CSNS
vided with the call, e.g. single numbering scheme calls or calls originating from analog devices.
Syntax
Test Command
AT+CSNS=?
Response(s)
+CSNS: (list of supported<mode>s)
OK
Read Command
AT+CSNS?
Response(s)
+CSNS:
<mode>
OK
Write Command
AT+CSNS=[<mode>]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
GSM 07.07
Parameter Description
(num)
<mode>
(D)
[0]
2
4
Notes
•
The command must be set before the call comes. By default, when you do not modify the settings, all calls
received without bearer element are assumed to be voice.
•
The setting will be saved when you power down the ME with AT^SMSO, provided that PIN authentication has
been done. The saved value will be restored when the same SIM card is inserted and PIN authentication done
again. If no SIM card or a different SIM card is inserted the default value 0 takes effect.
MC55_ATC_V04.00
Confidential / Released
PIN
!
Voice: Each call received without bearer element is assumed to be speech
Fax: Each call received without bearer element is assumed to be an incoming
fax.
Data: Each call received without bearer element is assumed to be a data call.
Please take into account that the bearer service parameters set with
apply to all data calls including those received without bearer capability.
Page 157 of 475
ASC0 ASC1
MUX1
MUX2
%
%
%
%
MUX3 Charge
Last
%
!
!
!
AT+CBST
3/17/06
Advertisement
Table of Contents
