Table of Contents
Advertisement
5.7
AT^SPWD Change Password
The
command provides the same functions as AT+CPWD. The major difference between both com-
AT^SPWD
mands is that, apart from the different prefixes "^SPWD" and "+CPWD", the
tional functions dedicated to the Customer SIM Lock. Please note that this feature is only supported by
specifically pre-configured MC55 modules and, therefore, not part of the standard "MC55 AT Command Set".
Ordering information and a detailed description of the "Customer SIM Lock" feature can be requested from Sie-
mens. All other functions and parameters of
Each password is a string of digits the length of which varies with the associated facility. The test command
returns a list of pairs which represent the available facilities and the maximum length of the associated password.
See also AT commands
Syntax
Test Command
AT^SPWD=?
Response(s)
^SPWD:list of supported ( <facility>,
OK
Write Command
AT^SPWD=<facility>,
Response(s)
New password has been registered for the facility lock function.
OK
If parameter
<old password>
+CME ERROR 16 (+CME ERROR: incorrect password)
If the password for the selected
+CME ERROR ...
If error is related to ME functionality:
+CME ERROR
Note
•
When changing the PIN2 (<facility>="P2") it is recommended to check the new state of PIN2 using the
command.
AT+CPIN2
MC55_ATC_V04.00
Confidential / Released
AT^SPWD
and
AT+CLCK
AT^SLCK
<password
<old
password>[,
<new
was not correct:
has been invalidated due to too many failed attempts:
<facility>
Page 119 of 475
are described in Section 5.6, AT+CPWD.
for more detail on the various lock features.
length>)
password>]
PIN
ASC0 ASC1
MUX1
%
%
%
%
command includes addi-
AT^SPWD
MUX2
MUX3 Charge
%
%
!
Last
!
!
3/17/06
Advertisement
Table of Contents
