Table of Contents
Advertisement
11.12
AT+CGSMS Select service for MO SMS messages
Syntax
Test Command
AT+CGSMS=?
Response(s)
+CGSMS: (list of supported <service>s)
OK
Read Command
AT+CGSMS?
Response(s)
+CGSMS:
<service>
OK
Write Command
AT+CGSMS=[<service>]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
GSM 07.07
Command Description
The test command is used for requesting information on which services and service preferences can be set by
using the
write command
AT+CGSMS
The read command returns the currently selected service or service preference.
The write command is used to specify the service or service preference that the MT will use to send MO SMS
messages. If parameter
Parameter Description
(num)
<service>
A numeric parameter which indicates the service or service preference to be used. Parameter is global for all
interfaces and volatile.
0
1
2
(&F)(P)
3
Note
•
Sending SMS via GPRS is only possible when mobile is attached using AT+CGATT.
MC55_ATC_V04.00
Confidential / Released
is not given, the current value remains unchanged.
<service>
GPRS
Circuit switched
GPRS preferred (use circuit switched SMS transfer if mobile is not GPRS
attached)
Circuit switched preferred (use GPRS if circuit switched is not available)
Page 290 of 475
PIN
ASC0 ASC1
MUX1
%
%
%
%
MUX2
MUX3 Charge
%
%
!
!
Last
!
3/17/06
Advertisement
Table of Contents
