Table of Contents
Advertisement
5.3
AT^SPIC Display PIN counter
The
command can be used to find out whether the ME is waiting for a password and, if so, how many
AT^SPIC
attempts are left to enter the password.
The execute command returns the number of attempts still available for entering the currently required password,
for example the PIN, PUK, PH-SIM PUK etc.
The read command AT^SPIC? indicates which password the number of attempts stated by the execute com-
mand actually refers to. Also, the write command may be used to query the counter for a specific password: It
indicates the number of attempts still available for entering the password identified by <facility>, for example
the PIN, PIN2, PH-SIM PIN etc.
To check whether or not you need to enter a password use the read commands AT+CPIN?, AT+CPIN2? and
AT^SPIC?. If the response to AT+CPIN? is "READY" the counter of the execute command
PIN2. See
last
example. If the responses to AT+CPIN? and AT+CPIN2? both read "READY", no password is
currently required, and the referrer of the execute command
Syntax
Test Command
AT^SPIC=?
Response(s)
OK
Read Command
AT^SPIC?
Response(s)
^SPIC:
<code>
OK
Exec Command
AT^SPIC
Response(s)
^SPIC:
<counter>
OK
Write Command
AT^SPIC=<facility>
Response(s)
^SPIC:
<counter>
OK
Reference(s)
SIEMENS
Parameter Description
(num)
<counter>
Number of attempts left to enter the currently required password. This number will be counted down after each
failure.
MC55_ATC_V04.00
Confidential / Released
is explicitly undefined.
AT^SPIC
PIN
ASC0 ASC1
!
%
%
Page 105 of 475
AT^SPIC
MUX1
MUX2
MUX3 Charge
%
%
%
!
relates to
Last
!
!
3/17/06
Advertisement
Table of Contents
