At^sisc Internet Service Close - Siemens Brodersen MC55 AT Command Manual

10.6

AT^SISC Internet Service Close

The write command closes the TCP/IP connection to the remote peer which was opened with
AT^SISC
AT^SISO. All resources are released, all status information parameters, e.g. <srvState>, <unackData>,
<ackData>, <rxCount>
served. The service can be restarted any time, using the same configuration or a new one.
Syntax
Test Command
AT^SISC=?
Response(s)
OK
Write Command
AT^SISC=<srvProfileId>
Response(s)
OK
ERROR
+CME ERROR: <err>
Parameter Description
(num)
<srvProfileId>
0...9
MC55_ATC_V04.00
Confidential / Released
and counters, are reset. Only the initial configuration settings are pre-
<txCount>
<srvProfileId>
Page 244 of 475
PIN ASC0 ASC1 MUX1
§ % % %
specified with AT^SISS.
MUX2 MUX3 Charge
% % ! !
Last
!
3/17/06