At+Cmux Enter Multiplex Mode - Siemens Brodersen MC55 AT Command Manual

At command manual
Table of Contents

Advertisement

4.8

AT+CMUX Enter multiplex mode

All information provided in this section applies to the ASC0 interface only. The second interface ASC1 has no
support of Multiplex mode.
Multiplex mode according to the ETSI TS 101 669 and GSM 07.10 enables one physical serial asynchronous
interface to be partitioned into three virtual channels. This allows you to take advantage of up to 3 simultaneous
sessions running on the serial interface. For example, you can send or receive data or make a call on the first
channel, while the other two channels are free to control the module with AT commands.
The MC55 module incorporates an internal multiplexer and thus integrates all the functions needed to implement
full-featured multiplex solutions. For the application on top, customers have the flexibility to create their own mul-
tiplex programs conforming to the multiplexer protocol. To help system integrators save the time and expense of
designing multiplexer applications, SIEMENS AG offers WinMUX2k, a ready-to-use multiplex driver for Windows
2000 and Windows XP. Another approach is to develop customized solutions based on the sources of the
WinMux2k driver.
Refer to
[5]
which provides a detailed description of the multiplex architecture and step-by-step instructions of
how to install and configure the multiplex mode. The WinMUX2k driver and its source files can be supplied on
request. Please contact your local distributor to obtain the latest installation software and user's guide.
Syntax
Test Command
AT+CMUX=?
Response(s)
+CMUX: (list of supported<mode>s)
OK
Read Command
AT+CMUX?
Response(s)
+CMUX:
<mode>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CMUX=<mode>
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s)
GSM 07.07, GSM 07.10
Parameter Description
(num)
<mode>
Multiplexer transparency mechanism
0
(num)
<subset>
Subparameters defined in GSM07.07 are adjusted for control and logical channels as follows
0
MC55_ATC_V04.00
Confidential / Released
PIN
!
Basic option
UIH frames used only (control channel)
Page 95 of 475
ASC0 ASC1
MUX1
MUX2
%
!
!
!
MUX3 Charge
Last
!
!
!
%
3/17/06

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brodersen mc55

Table of Contents