Table of Contents
Advertisement
2.11
AT+CMEE Mobile Equipment Error Message Format
controls the format of the error result codes that indicates errors related to MC55 functionality. Format
AT+CMEE
can be selected between plain "ERROR" output, error numbers or verbose "+CME ERROR: <err>" and "+CMS
ERROR: <err>" messages.
Possible error result codes are listed in Table 2.4,
eral "CME ERROR" Codes
2.7,
SMS related "CMS ERROR" Codes (GSM
In multiplex mode (refer AT+CMUX) the setting applies only to the logical channel where selected. The setting on
the other channels may differ.
Syntax
Test Command
AT+CMEE=?
Response(s)
+CMEE: (list of supported<errMode>s)
OK
Read Command
AT+CMEE?
Response(s)
+CMEE:
<errMode>
OK
Write Command
AT+CMEE=<errMode>
Response(s)
OK
ERROR
+CME ERROR:
<err>
Reference(s)
GSM 07.07
Parameter Description
(num)(&W)(&V)
<errMode>
(&F)(D)
0
1
2
Example
To obtain enhanced error messages it is recommended to choose <errMode>=2.
AT+CMEE=2
OK
MC55_ATC_V04.00
Confidential / Released
General "CME ERROR" Codes (GSM
(SIEMENS)Table 2.6,
GPRS related "CME ERROR" Codes (GSM 07.07)
07.05).
Disable result code, i.e. only "ERROR" will be displayed.
Enable error result code with numeric values.
Enable error result code with verbose (string) values.
Page 44 of 475
PIN
ASC0 ASC1
MUX1
!
%
%
%
07.07)Table 2.5,
and Table
MUX2
MUX3 Charge
%
%
!
!
Gen-
Last
!
3/17/06
Advertisement
Table of Contents
