At+Frh Receive Data Using Hdlc Framing - Siemens Brodersen MC55 AT Command Manual

12.22

AT+FRH Receive Data Using HDLC Framing

The command enables the TA to receive frames using the HDLC protocol and the modulation schemes
AT+FRH
defined in Section 12.1,
modem is on-hook. The test command can be used in off-hook mode to check the modulation schemes sup-
ported by MC55.
Syntax
Test Command
AT+FRH=?
Response(s)
In off-hook mode only:
+FRH:(list of <mod>s)
OK
In on-hook mode:
ERROR
Write Command
AT+FRH=<mod>
Response(s)
CONNECT
If error is related to ME functionality
ERROR
Reference(s)
TIA/EIA-578
Note
• Used for Fax Class 1 only.
MC55_ATC_V04.00
Confidential / Released
FAX parameters. An ERROR response code results if the command is issued while the
Page 324 of 475
PIN ASC0 ASC1 MUX1
! % ! %
MUX2 MUX3 Charge
! ! ! !
Last
!
3/17/06