At^slms List Sms Memory Storage - Siemens Brodersen MC55 AT Command Manual

13.18

AT^SLMS List SMS Memory Storage

indicates the max. capacity of each SMS storage type and the number of locations currently used.
AT^SLMS
Syntax
Test Command
AT^SLMS=?
Response(s)
OK
Exec Command
AT^SLMS
Response(s)
^SLMS: ''MT'',<total3>,
^SLMS: ''SM'',<total1>,
^SLMS: ''ME'',<total2>,
OK
ERROR
+CMS ERROR
Reference(s)
SIEMENS
Parameter Description
(num)
<total1>
Maximum number of messages storable in the SMS memory of the SIM (physical storage "SM")
(num)
<total2>
Maximum number of messages storable in the SMS memory of the Mobile Equipment (physical storage "ME")
(num)
<total3>
Sum of "SM" and "ME", indicated as "MT". Maximum number of all messages storable in the SIM memory and
the Mobile Equipment memory.
(num)
<used1>
Number of messages currently stored in the SMS memory of the SIM (physical storage "SM")
(num)
<used2>
Number of messages currently stored in the SMS memory of the Mobile Equipment (physical storage "ME")
(num)
<used3>
Concatenated logical SMS storages of SIM ("SM") and Mobile Equipment ("ME"). Sum of all messages currently
stored, indicated as "MT".
Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1, Restricted access to SIM data after SIM PIN authentication
MC55_ATC_V04.00
Confidential / Released
<used3>
<used1>
<used2>
Page 360 of 475
PIN ASC0 ASC1 MUX1
% % % %
MUX2 MUX3 Charge
% % ! !
for further detail.
Last
!
3/17/06