Table of Contents
Advertisement
7.4
ATD><mem><n> Mobile originated call using specific memory
and index number
Syntax
Exec Command
ATD><mem><n>[<mgsm>];
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK
Reference(s)
V.250
Command Description
TA attempts to set up an outgoing call to the specified number. The termination character ";" is mandatory since
dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services
or other functions.
Parameter Description
(str)
<mem>
Phonebook storage:
For detailed description of storages see AT+CPBS.
"FD"
"SM"
"ON"
"ME"
"LD"
"MC"
"RC"
(num)
<n>
Integer type memory location in the range of locations available in the selected memory, i.e. the index number
returned by AT+CPBR.
(str)
<mgsm>
String of GSM modifiers:
I
Activates CLIR (disables presentation of own phone number to called party)
i
Deactivates CLIR (enables presentation of own phone number to called party)
MC55_ATC_V04.00
Confidential / Released
PIN
%
Fixed dialing phonebook
SIM phonebook
MSISDN list
Mobile Equipment Phonebook
Last number dialed phonebook
Missed (unanswered received) calls list
Received calls list
Page 130 of 475
ASC0 ASC1
MUX1
MUX2
%
§
%
§
MUX3 Charge
Last
§
!
!
!
3/17/06
Advertisement
Table of Contents
