At+Fcq Copy Quality Checking - Siemens Brodersen MC55 AT Command Manual

12.7

AT+FCQ Copy Quality Checking

This command controls Copy Quality checking when receiving a fax.
Syntax
Test Command
AT+FCQ=?
Response(s)
(list of supported copy quality checking <cq>s)
OK
Read Command
AT+FCQ?
Response(s)
<cq>
OK
Write Command
AT+FCQ=<cq>
Response(s)
OK
Reference(s)
EIA PN-2388
Parameter Description
(num)
<cq>
0
[1]
Note
• Used for Fax Class 2 only.
MC55_ATC_V04.00
Confidential / Released
PIN
!
No copy quality checking. The ME will generate Copy Quality OK (MCF)
responses to complete pages.
ME can check 1-D phase data. The connected application must check copy
quality for 2-D phase C data.
Page 309 of 475
ASC0 ASC1 MUX1 MUX2
% ! % !
MUX3 Charge Last
! ! ! !
3/17/06