At^smong Cell Info Table; Mc55_Atc_V04.00 - Siemens Brodersen MC55 AT Command Manual

Note
• For compatibility with earlier products and to support legacy applications, often any input character will stop
the periodic output of the write command. But since this applies only in certain cases (depending on the set-
tings of and AT+CMUX), it is recommended to always use "at" or "AT".
AT+IPR
8.10.1

AT^SMONG Cell Info Table

Example output for AT^SMONG:
GPRS Monitor
BCCH G PBCCH PAT MCC
0637 1 - 4
Columns of the cell info table:
Column Description
BCCH ARFCN of BCCH carrier
G GPRS available ("1") or not available ("-") in currently used cell
PBCCH If PBCCH is present, indication of ARFCN, else ''-'' or if Frequency Hopping is used ''H''
PAT Priority Access Threshold (GSM Rec. 04.08 / 10.5.2.37b)
0
1
2
3
4
MCC Mobile Country Code
MNC Mobile Network Code
NOM Network Operation Mode (1...3)
TA Timing Advance Value
RAC Routing Area Code (as hexadecimal value)

MC55_ATC_V04.00

Confidential / Released
MNC NOM TA
234 05 2 00
Packet access is not allowed in the cell
Spare, shall be interpreted as "000" (packet access not allowed)
Spare, shall be interpreted as "000" (packet access not allowed)
Packet access is allowed for priority level 1
Packet access is allowed for priority level 1 to 2
Page 183 of 475
RAC # Cell
0B
#
3/17/06