At^smgr Read Short Message Without Setting Status To Rec Read - Siemens Brodersen MC55 AT Command Manual

13.21 AT^SMGR Read short message without setting status to REC
READ
The command is a specific Siemens command which has the same syntax as AT+CMGR. The only func-
AT^SMGR
tional difference is that the status "REC UNREAD" of a short message is not overwritten to "REC READ".
Syntax
Test Command
AT^SMGR=?
Response(s)
^SMGR:
OK
Write Command
AT^SMGR=<index>
Response(s)
see
AT+CMGR
Reference(s)
SIEMENS
Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1, Restricted access to SIM data after SIM PIN authentication
MC55_ATC_V04.00
Confidential / Released
PIN ASC0 ASC1
% % %
Page 364 of 475
MUX1 MUX2 MUX3 Charge
% % % !
for further detail.
Last
! !
3/17/06