Table of Contents
Advertisement
2.3
AT&W Stores current configuration to user defined profile
stores the currently set parameters to a user defined profile in the non-volatile memory.
AT&W
Syntax
Exec Command
AT&W[<value>]
Response(s)
OK
ERROR/+CME ERROR <err>
Reference(s)
V.250
Parameter Description
(num)
<value>
[0]
Notes
•
The user defined profile will be restored automatically after power-up. Use
to restore factory settings. Until the first use of AT&W,
AT&F
•
stores all global settings and the current local settings of the interface, on which the command is exe-
AT&W
cuted.
•
A list of parameters stored to the user profile can be found in Section 20.5,
able with
AT&W.
MC55_ATC_V04.00
Confidential / Released
PIN
!
Number of profile
Page 32 of 475
ASC0 ASC1
MUX1
MUX2
%
%
%
%
ATZ
works as AT&F.
ATZ
AT Command Settings stor-
MUX3 Charge
Last
%
!
!
!
to restore user profile and
3/17/06
Advertisement
Table of Contents
