At+Cgerep Gprs Event Reporting - Siemens Brodersen MC55 AT Command Manual

11.5

AT+CGEREP GPRS event reporting

The write command enables or disables sending of unsolicited result codes, "+CGEV" from MT to TE in the case
of certain events occurring in the GPRS MT or the network.
codes specified within this command.
entered. If a setting is not supported by the MT, ERROR or +CME ERROR: is returned.
Read command returns the current
Test command returns the modes and buffer settings supported by the MT as compound values.
Syntax
Test Command
AT+CGEREP=?
Response(s)
+CGEREP: (list of supported <mode>s), (list of supported <bfr>s)
OK
Read Command
AT+CGEREP?
Response(s)
+CGEREP: <mode>, <bfr>
OK
Write Command
AT+CGEREP=[<mode>[, <bfr>]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
GSM 07.07
Unsolicited Result Codes
URC 1
+CGEV: REJECT <PDP_type>,
A network request for PDP context activation occurred when the MT was unable to report it to the TE with a
+CRING unsolicited result code and was automatically rejected.
URC 2
+CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]
The network has requested a context reactivation. The
vided if known to the MT.
URC 3
+CGEV: NW DEACT <PDP_type>, <PDP_addr>, [<cid>]
The network has forced a context deactivation. The
if known to the MT.
URC 4
+CGEV: ME DEACT <PDP_type>, <PDP_addr>, [<cid>]
The mobile equipment has forced a context deactivation. The
provided if known to the MT.
MC55_ATC_V04.00
Confidential / Released
<mode>
controls the effect on buffered codes when
<bfr>
and buffer settings.
<mode>
PIN ASC0 ASC1
% %
<PDP_addr>
<cid>
<cid>
Page 273 of 475
controls the processing of unsolicited result
MUX1 MUX2 MUX3 Charge
% % %
that was used to reactivate the context is pro-
that was used to activate the context is provided
that was used to activate the context is
<cid>
1 or 2 is
<mode>
Last
% ! ! !
3/17/06