Table of Contents
Advertisement
^SISR: 1, 50
hardware
inttest
software
support
systemtest
OK
^SISR: 1, 2
at^sisc=1
OK
10.11.7
Configuring and Using FTP Upload (URC Mode)
First set up a connection profile as explained in Section
which are mandatory for the connection profile.
Configure the service profile 1 for FTP:
at^siss=1,srvType,ftp
OK
at^siss=1,conId,0
OK
at^siss=1,address,"ftpput://
myname:mypasswd@192.168.1.2/upload/exam-
ple.bin;type=i"
OK
Make an FTP connection:
at^siso=1
OK
^SISW: 1, 1
at^sisw=1,100
^SISW: 1,100,100
0123456789012345678901234567890123456789012
3456789012345678901234567890123456789012345
67890123456789
OK
^SISW: 1, 1
at^sisw=1,0,1
OK
^SISW: 1, 2
at^sisc=1
10.11.8
Configuring SMPT Service Profile
First set up a connection profile as explained in Section
which are mandatory for a CSD or GPRS profile. The example uses the connection profile ID 1 and the service
profile ID 9.
at^siss=9,srvType,"Smtp"
OK
MC55_ATC_V04.00
Confidential / Released
50 bytes are now available.
Data transfer finished. No more data available. The
connection to the FTP server is closed.
Close the service.
10.1.1
or Section 10.1.2. Enter at least all parameters
Select service type FTP.
Select connection profile 0.
Specify FTP address with individual user name and
password. The file "example.bin" shall be created on
the FTP server.
Open the service.
Bearer is established, service is getting started.
FTP service is ready for upload.
Client requests to send 100 bytes.
The write command response confirms that 100
bytes must be transferred now.
User data is transferred.
URC indicates that the FTP service is ready to trans-
fer more data. Data of the last
transferred to the remote host.
No more data available. The file "example.bin" shall
be closed on the FTP server.
Data transfer finished successfully. The connection
to the FTP server is closed.
Close the FTP service.
10.1.1
or Section 10.1.2. Enter at least all parameters
Select service type SMTP.
Page 259 of 475
command is
AT^SISW
3/17/06
Advertisement
Table of Contents
