Table of Contents
Advertisement
13.13
AT+CSCA SMS Service Center Address
Write command updates the SMSC address, through which mobile originated SMs are transmitted. In text mode,
setting is used by send and write commands. In PDU mode, setting is used by the same commands, but only
when the length of the SMSC address coded into the
Syntax
Test Command
AT+CSCA=?
Response(s)
OK
Read Command
AT+CSCA?
Response(s)
+CSCA: <sca>,
<tosca>
OK
Write Command
AT+CSCA=<sca>[, <tosca>]
Response(s)
OK
Reference(s)
GSM 07.05
Notes
•
In case of using no parameter after AT+CSCA= the content of
•
This command writes the service center address to non-volatile memo.
•
The SMS service center address should be entered as specified by the service provider.
MC55_ATC_V04.00
Confidential / Released
parameter equals zero.
<pdu>
PIN
ASC0 ASC1
%
%
%
<sca>
Page 353 of 475
MUX1
MUX2
MUX3 Charge
%
%
%
!
will be deleted.
Last
!
!
3/17/06
Advertisement
Table of Contents
