Status Control Commands; At+Cmer Mobile Equipment Event Reporting - Siemens Brodersen MC55 AT Command Manual

3.

Status Control Commands

The AT Commands described in this chapter allow the external application to obtain various status information
from the MC55.
3.1

AT+CMER Mobile Equipment Event Reporting

This command controls details of the "+CIEV" URC presentation related to
via these commands the URCs are sent whenever a value of the related indicator changes.
In addition, controls "^SLCC" URCs related to AT^SLCC. For details refer to
AT+CMER
and AT^SCFG, parameter <sucs>.
mation, AT^SLCC
The read command returns the URC presentation mode
status <ind>.
The write command enables and disables the presentation of "+CIEV: <indDescr>,
]" URCs.
Value> <indDescr>
2
this indicator. After
AT+CMER
ples provided in Section 3.2,
Syntax
Test Command
AT+CMER=?
Response(s)
+CMER: (list of supported<mode>s), (list of supported <keyp>s), (list of supported <disp>s), (list of
supported <ind>s), (list of supported <bfr>s)
OK
Read Command
AT+CMER?
Response(s)
+CMER: <mode>, <keyp>, <disp>, <ind>,
OK
Write Command
AT+CMER=[<mode>[, <keyp>[, <disp>[, <ind>[, <bfr>]]]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
GSM 07.07
Unsolicited Result Code
+CIEV: <indDescr>,
A value of an indicator has changed.
MC55_ATC_V04.00
Confidential / Released
refers to the name of a "+CIEV" indicator and
has been switched on, URCs for all registered indicators will be issued. See exam-
and Section 3.3, AT^SIND.
AT+CIND
<bfr>
<indValue> [, <indValue>
1
Page 60 of 475
AT^SIND
and among others, the indicator event reporting
<mode>
PIN ASC0 ASC1 MUX1
% % % %
]
2
and AT+CIND. If registered
Call Status Infor-
[,
<indValue>
1
is the new value of
<indValue>
MUX2 MUX3 Charge
% % ! !
<ind-
Last
!
3/17/06