At+Cpbw Write Into Phonebook - Siemens Brodersen MC55 AT Command Manual

16.4

AT+CPBW Write into Phonebook

The write command can be used to create, edit and delete a phonebook entry at a
AT+CPBW
the active storage selected with AT+CPBS.
If <storage>="FD" (SIM fixed dialing numbers) is selected, PIN2 authentication has to be performed prior to
any write access.
The test command returns the location range supported by the current storage, the maximum length
AT+CPBW
of the field, the range of supported
<number>
Note: The length may not be available while SIM storage is selected. If storage does not offer format information,
the format list contains empty parenthesizes.
Syntax
Test Command
AT+CPBW=?
Response(s)
+CPBW: (1-<maxloc>), <nlength>, (list of supported <type>s),
OK
ERROR
+CME ERROR
Write Command
AT+CPBW=[<location>][, <number>[[, <type>][, <text>]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
GSM 07.07, GSM 04.08
Parameter Description
(num)
<location>
Location number within phonebook memory. The maximum range supported by each storage type is indicated
in the test command response. If
If is given as the only parameter, the phonebook entry specified by
<location>
(str)
<number>
Phone number in format specified by <type>. Parameter must be present, although it may be an empty string.
Alphabetic characters are not permitted.
If other printable non-alphabetic characters are used the entry needs to be saved with <type>=209. Otherwise,
if <type>=209 is not used any non-digit characters other than "*", "#" or "+" will be removed from the string and
only accepted modifiers from the GSM alphabet will be saved.
A saved with <type>=209 requires double memory. In order to fit into a standard location, the num-
<number>
ber needs to be reduced to a maximum length of <nlength>/2, including all digits and dial string modifiers.
Extended locations may be used as stated below for <nlength>.
MC55_ATC_V04.00
Confidential / Released
values and the maximum length of the
<type>
PIN
%
is not given, the first free entry will be used.
<location>
may contain dialstring modifiers "*", "#" or "+".
<number>
Page 387 of 475
<tlength>
ASC0 ASC1 MUX1 MUX2
% % % %
<location>
of
<location>
field.
<text>
MUX3 Charge Last
% ! ! !
is deleted.
3/17/06