Superscript Notation For Parameters And Values; Table 1.1: Symbols Used To Mark The Type Of Parameters; Table 1.2: Symbols Used To Indicate The Correlations With Other Commands; Table 1.3: Symbols Used To Mark Different Types Of Default Values Of Parameters - Siemens Brodersen MC55 AT Command Manual

1.3.2

Superscript notation for parameters and values

Table 1.1: Symbols used to mark the type of parameters
Parameter type
(num)
<param>
(str)
<param>
Table 1.2: Symbols used to indicate the correlations with other commands
Parameter option
(&W)
<param>
(&V)
<param>
(ˆSNFW)
<param>
(+CSCS)
<param>
Table 1.3: Symbols used to mark different types of default values of parameters
Value option
[x]
(&F)
x
(P)
x
(D)
x
MC55_ATC_V04.00
Confidential / Released
Meaning
Parameter value must be numeric type
Parameter value must be string type
Meaning
Parameter value will be stored with
Parameter value will be displayed with
Parameter value will be stored with
Parameter value has to be (is) coded according to current setting of
for details)
AT+CSCS
Meaning
Default value: if the parameter is omitted, the value 'x' will be assumed
Factory default value, will be restored to 'x' with
Powerup default value of a parameter which is not stored at power down
Delivery default value of a parameter which cannot be restored automatically
Page 16 of 475
AT&W
AT&V
AT^SNFW
AT&F
(see
<chset>
3/17/06