At+Fdis Query Or Set Session Parameters - Siemens Brodersen MC55 AT Command Manual

12.11

AT+FDIS Query or set session parameters

This command allows the controlling application to sense and constrain the capabilities used for the current ses-
sion. It uses to generate DIS or DTC messages directly, and uses
AT+FDIS
sages to generate DCS messages.
Syntax
Test Command
AT+FDIS=?
Response(s)
(list of <vr>s), (list of <br>s), (list of <wd>s), (list of <ln>s), (list of <df>s), (list of <ec>s), (list of <bf>s),
(list of <st>s)
OK
Read Command
AT+FDIS?
Response(s)
<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>,
OK
Write Command
AT+FDIS=<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>,
Response(s)
OK
Reference(s)
EIA PN-2388
Note
• Used for Fax Class 2 only.
MC55_ATC_V04.00
Confidential / Released
<st>
<st>
PIN ASC0 ASC1
! % !
Page 313 of 475
and received DIS mes-
AT+FDIS
MUX1 MUX2 MUX3 Charge
% ! ! !
Last
! !
3/17/06