At+Cr Service Reporting Control - Siemens Brodersen MC55 AT Command Manual

7.22

AT+CR Service reporting control

configures the TA whether or not to transmit an intermediate result code +CR:
AT+CR
call is being set up.
Setting the value of
<mode>
result code/URC.
Syntax
Test Command
AT+CR=?
Response(s)
+CR: (list of supported<mode>s)
OK
ERROR
Read Command
AT+CR?
Response(s)
+CR: <mode>
OK
ERROR
Write Command
AT+CR=<mode>
Response(s)
OK
ERROR
Reference(s)
GSM 07.07
Intermediate Result Code
If enabled, an intermediate result code is transmitted during connect negotiation when the TA has determined
the speed and quality of service to be used, before any error control or data compression reports are transmitted,
and before any final result code (e.g. CONNECT) appears.
+CR: <serv>
Parameter Description
(num)(&W)(&V)
<mode>
(&F)
0
1
(str)
<serv>
"REL ASYNC"
"GPRS"
MC55_ATC_V04.00
Confidential / Released
to 1 may lead to connection failure, if the application (e.g. WinFax) waits for default
Disable
Enable
Asynchronous non-transparent
GPRS
Page 155 of 475
PIN ASC0 ASC1 MUX1
% % % %
to the TE when a
<serv>
MUX2 MUX3 Charge
% % ! !
Last
!
3/17/06