Atv Set Result Code Format Mode; Verbose And Numeric Result Codes - Siemens Brodersen MC55 AT Command Manual

2.5

ATV Set result code format mode

This command determines the contents of header and trailer transmitted with AT command result codes and
information responses. Possible responses are described in Section 2.5.1,
Syntax
Exec Command
ATV[<value>]
Response(s)
OK
ERROR
Reference(s)
V.250
Parameter Description
(num)(&W)(&V)
<value>
[0]
(&F)
1
2.5.1

Verbose and numeric result codes

Verbose format
OK
CONNECT
RING
NO CARRIER
ERROR
NO DIALTONE
BUSY
CONNECT 2400/RLP
CONNECT 4800/RLP
CONNECT 9600/RLP
CONNECT 14400/RLP
ALERTING
DIALING
MC55_ATC_V04.00
Confidential / Released
Information response: <text><CR><LF>
Short result code format: <numeric code><CR>
Information response: <CR><LF><text><CR><LF>
Long result code format: <CR><LF><verbose code><CR>
Numeric format
0
1
2
3
4
6
7
47
48
49
50
Page 34 of 475
Verbose and numeric result
PIN ASC0 ASC1 MUX1
! % % %
Meaning
Command executed, no errors
Link established
Ring detected
Link not established or disconnected
Invalid command or command line too long
No dial tone, dialling impossible, wrong mode
Remote station busy
Link with 2400 bps and Radio Link Protocol
Link with 4800 bps and Radio Link Protocol
Link with 9600 bps and Radio Link Protocol
Link with 14400 bps and Radio Link Protocol
Alerting at called phone
Mobile phone is dialing
MUX2 MUX3 Charge
% % ! !
codes.
Last
!
3/17/06