Table of Contents
Advertisement
2.12
AT+CSCS Select TE character set
The
write command informs the TA which character set
AT+CSCS
TA to convert character strings correctly between TE and ME character sets. See also Section 1.5,
character
sets.
Note that when the TA-TE interface is set to 8-bit operation and the used TE alphabet is 7-bit, the highest bit will
be set to zero.
Syntax
Test Command
AT+CSCS=?
Response(s)
+CSCS: (list of supported<chset>s)
OK
Read Command
AT+CSCS?
Response(s)
+CSCS:
<chset>
OK
Write Command
AT+CSCS=[<chset>]
Response(s)
OK
Reference(s)
GSM 07.07, GSM 11.11
Parameter Description
(str)
<chset>
(&F)(P)
"GSM"
"UCS2"
MC55_ATC_V04.00
Confidential / Released
PIN
!
GSM default alphabet (GSM 03.38 subclause 6.2.1);
Note: This setting may cause software flow control problems since the codes
used to stop and resume data flow (XOFF = decimal 19, XON = decimal 17)
are interpreted as normal characters.
16-bit universal multiple-octet coded character set (ISO/IEC10646 [32]); UCS2
character strings are converted to hexadecimal numbers from 0000 to FFFF;
e.g. "004100620063" equals three 16-bit characters with decimal values 65, 98
and 99.
Page 49 of 475
is used by the TE. This enables the
<chset>
ASC0 ASC1
MUX1
MUX2
%
%
%
%
Supported
MUX3 Charge
Last
%
!
!
!
3/17/06
Advertisement
Table of Contents
