At+Fdcc Query Or Set Capabilities - Siemens Brodersen MC55 AT Command Manual

12.9

AT+FDCC Query or set capabilities

This command allows the connected application to sense and constrain the capabilities of the facsimile DCE
(=ME), from the choices defined in CCITT T.30 Table 2.
Syntax
Test Command
AT+FDCC=?
Response(s)
(list of <vr>s), (list of <br>s), (list of <wd>s), (list of <ln>s), (list of <df>s), (list of <ec>s), (list of <bf>s),
(list of <st>s)
OK
Read Command
AT+FDCC?
Response(s)
<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>,
OK
Write Command
AT+FDCC=<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>,
Response(s)
OK
Reference(s)
EIA PN-2388
Notes
• For further information see AT+FDIS.
• Used for Fax Class 2 only.
MC55_ATC_V04.00
Confidential / Released
<st>
<st>
PIN ASC0 ASC1
! % !
Page 311 of 475
MUX1 MUX2 MUX3 Charge
% ! ! !
Last
! !
3/17/06