3.3
AT^SIND Extended Indicator Control
Designed for extended event indicator control
•
offers greater flexibility than the standard command AT+CIND,
•
offers several extra indicators,
•
can show the current status of all indicators supported by
•
can be used to register or deregister the indicators of both commands,
•
displays all indicator event reports via "+CIEV" URCs.
Presentation mode of the generated URCs is controlled via AT+CMER.
The
read command provides a list of all indicators supported by
AT^SIND
tor is represented with its registration mode and current value.
The
write command can be used to select a single indicator in order to modify its registration and to
AT^SIND
view the current value.
Syntax
Test Command
AT^SIND=?
Response(s)
^SIND: (<indDescr>, list of supported <indValue>s)[, (<indDescr>, list of supported <indValue>s)[,
...]], (list of supported <mode>s)
OK
Read Command
AT^SIND?
Response(s)
^SIND: <indDescr>, <mode>,
[^SIND: <indDescr>, <mode>, <indValue>]
...
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SIND=<indDescr>,
Response(s)
^SIND: <indDescr>, <mode>,
In case of: <indDescr>="eons" and <mode>=2
^SIND: <indDescr>, <mode>, <indValue>, <eonsOperator>,
In case of: <indDescr>="nitz" and <mode>=2
^SIND: <indDescr>, <mode>, <nitzUT>, <nitzTZ>,
OK
ERROR
+CME ERROR: <err>
Reference(s)
SIEMENS
MC55_ATC_V04.00
Confidential / Released
AT^SIND
<indValue>
<mode>
<indValue>
Page 65 of 475
and AT^SIND,
AT+CIND
AT+CIND
<servProvider>
<nitzDST>
PIN
ASC0 ASC1
MUX1
!
%
%
%
and AT^SIND. Each indica-
MUX2
MUX3 Charge
%
%
!
!
Last
!
3/17/06