Retrieving Email (Polling Mode) - Siemens Brodersen MC55 AT Command Manual

at^siso=1
OK
^SISR: 1, 1
at^sisr=1,500
^SISR: 1, 500
Return-Path: <subscriber1@testdomain.com>
X-Original-To: subscriber1@testdomain.com
Delivered-To: subscriber2@testdomain.com
Received: from 10.10.0.132 (unknown [10.10.0.132])
by testdomain.com (Postfix) with SMTP id 379321D004
for <subscriber1@testdomain.com>; Tue, 20 Dec 2005 08:00:07 +0100 (CET)
To: subscriber2@testdomain.com
Cc:
From: subscriber1@testdomain.com
Subject: TestMail
Message-Id: <20051220070007.379321D004@testdomain.com >
Date: Tue, 20 Dec 2005 08:00:07 +0100
OK
at^sisr=1,500
at^sisr=1,78
(CET)
X-UIDL: &lL"!(Z6"!^cl!!1+%"!
Status: RO
Hallo Tom!Bye Bye Tom!
.
OK
^SISR: 1, 2
at^sisc=1
OK
10.11.13

Retrieving Email (Polling Mode)

This example uses the service profile described in Section 10.11.11.
at^siso=1
OK
at^sisr=1,1000
^SISR: 1, 0
OK
at^sisr=1,1000
^SISR: 1, 0
OK
at^sisr=1,1000
^SISR: 1, 578
MC55_ATC_V04.00
Confidential / Released
Open the service that was created to retrieve email
number 2 from the POP3 server.
The "^SISR" indicates that data is available for read-
ing.
Try to read 500 bytes.
Command response indicates that 500 bytes will be
transferred, i.e. there will be no other URC since the
requested length equals the confirmed length.
Try to read another 500 bytes.
Command response indicates that only 78 bytes will
transferred.
Dot indicates end of mail according to RFC 2821.
Parameter
<urcCauseId>
confirms that all data is transferred successfully.
Close the service.
Open the service that was created to retrieve email
number 2 from the POP3 server.
Try to read 1000 bytes.
Command response indicates that currently no data
is available.
Again, try to read 1000 bytes.
Command response indicates that currently no data
is available.
Again, try to read 1000 bytes.
Command response indicates that 578 bytes are
available for reading.
Page 263 of 475
of the "^SISR" URC
3/17/06