Table of Contents
Advertisement
13.16
AT+CSMP Set SMS text Mode Parameters
The write command selects values for additional parameters needed when the short message is sent to the net-
work or placed in a storage when text format message mode is selected.
It is possible to set the validity period starting from the time when the short message is received by the SMSC
(<vp>
is in range 0... 255) or define the absolute time of the validity period termination
format of
is given by <fo>. If TA supports the enhanced validity period format, see GSM 03.40), it shall be
<vp>
given as a hexadecimal coded string (e.g. <pdu>) with quotes.
Syntax
Test Command
AT+CSMP=?
Response(s)
OK
Read Command
AT+CSMP?
Response(s)
+CSMP:<fo>, <vp>/ <scts>, <pid>,
OK
Write Command
AT+CSMP=<fo>[, <vp>/<scts>[, <pid>[, <dcs>]]]
Response(s)
+CSMP:
<index>
OK
If sending fails
ERROR
+CMS ERROR
Reference(s)
GSM 07.05
Parameter Description
(num)
<fo>
First Octet
depending on the command or result code: first octet of GSM 03.40 SMS-DELIVER, SMS-SUBMIT (default 17),
SMS-STATUS-REPORT, or SMS-COMMAND (default 2) in integer format
(&F)
0...17
...255
(num)
<vp>
Depending on SMS-SUBMIT
string format (refer <dt>)
(&F)
0...167
...255
(num)
<dcs>
Data Coding Scheme
GSM 03.38 SMS Data Coding Scheme, or Cell Broadcast Data Coding Scheme in integer format
(&F)
0
...247
MC55_ATC_V04.00
Confidential / Released
<dcs>
PIN
%
setting: GSM 03.40 TP-Validity-Period either in integer format or in time-
<fo>
Page 356 of 475
ASC0 ASC1
MUX1
MUX2
%
%
%
%
(<vp>
is a string). The
MUX3 Charge
Last
%
!
!
!
3/17/06
Advertisement
Table of Contents
