Table of Contents
Advertisement
12.23
AT+FRM Receive Data
The
command causes the TA to enter the receive mode, using one of the modulation schemes defined
AT+FRM
in Section 12.1,
FAX
parameters.
An ERROR response code results if the write command is issued while the modem is on-hook. The test com-
mand can be used in on-hook or off-hook mode to check the modulation schemes supported by MC55.
Syntax
Test Command
AT+FRM=?
Response(s)
(list of <mod>s)
OK
Write Command
AT+FRM=<mod>
Response(s)
CONNECT
If error is related to ME functionality:
ERROR
Reference(s)
TIA/EIA-578
Notes
•
Used for Fax Class 1 only.
•
<mod>= 3 is not possible.
MC55_ATC_V04.00
Confidential / Released
PIN
ASC0 ASC1
!
%
!
Page 325 of 475
MUX1
MUX2
MUX3 Charge
%
!
!
!
Last
!
!
3/17/06
Advertisement
Table of Contents
