I/O Interfaces; Figure 4: Vx3030 Front Panel I/O Interfaces; Table 2: Front I/O Interfaces - Kontron VX3030 User Manual

VX3030 User's Guide
1.3.4

I/O Interfaces

Front Interfaces
Not available on RC (Rugged Conduction-Cooled) boards
Function
Serial Ports
COM: 1x EIA-232/EIA-485 UART interface for CPU on RJ-12
connector.
1000BASE-T on RJ-45 connectors:
Gigabit
Note: this port is configurable from the BIOS to be routed to the VPX
Ethernet
P1 connector instead of the front connector ETH
USB USB 2.0 interface
Graphics VGA:
Reset Reset push button
LEDs 3 LEDs reporting the board CPU health status and activity
CA.DT.A87-5e
Serial
GbE
COM
ETH
Reset CPU
LEDs
L1 L2 L3

Figure 4: VX3030 Front Panel I/O Interfaces

Description
VGA connector

Table 2: Front I/O Interfaces

Graphics
USB
VGA
Introduction
See also
Section 4.1.1 for Pin
Assignment
Section 4.1.2 for Pin
Assignment
Section 4.1.3 for Pin
Assignment
Section 4.1.4 for Pin
Assignment
Figure 4
Section 4.4 for
LEDs Description
Page 9