Changing Parameter Settings Using Simatic Pdm; Parameters Accessed Via Pull-Down Menus - Siemens Sitrans LR250 Instruction Manual

Changing parameter settings using SIMATIC PDM

Notes:
• For a complete list of parameters, see
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
1. Launch SIMATIC PDM, connect to SITRANS LR250, and upload data from the
device.
2. Adjust parameter values in the parameter value field then press Enter. The status
fields read Changed.
3. Open the Device menu, click on Download to device, then use File – Save, to save
parameter settings. The status fields are cleared.

Parameters accessed via pull-down menus

You have access to a number of functions via pull-down menus from the menu bar under
Device or View.
For a complete list see
Page 46 SITRANS LR250 (HART) – INSTRUCTION MANUAL
Parameter Reference
Pull-down menus via SIMATIC PDM
pull-down
menus
on page 53.
value
fields
on page 53.
7ML19985JE01