Online Display; Changing Parameter Settings Using Simatic Pdm - Siemens SITRANS LR250 Instruction Manual
Hide thumbs
Also See for SITRANS LR250:
- Operating instructions manual (306 pages) ,
- Quick start manual (272 pages) ,
- Instruction manual (175 pages)
Table of Contents
Advertisement
Online Display
The online display allows you to compare outputs in real time. Open the menu View – Display.
Changing parameter settings using SIMATIC PDM
For a complete list of parameters, see
Note:
1.
Launch SIMATIC PDM, connect to SITRANS LR250, and upload data from the
device.
2.
Adjust parameter values in the parameter value field then press Enter. The status
fields read Changed..
3.
Open the Device menu, click on Download to device, then use File – Save, to save
parameter settings. The status fields are cleared.
Parameters accessed via pull-down menus
Pull-down menus via SIMATIC PDM
See
be accessed only via pull-down menus in SIMATIC PDM.
7ML19985JE01
on page 43 for a complete list of parameters that can
SITRANS LR250 (HART) – INSTRUCTION MANUAL
Parameter Reference
on page 61.
value
fields
Page 53
Advertisement
Table of Contents
Troubleshooting
