Introduction; Scope Of Application; Target Group; Document History - Siemens SITRANS FC720 Operating Instructions Manual

Scope of application

1 Introduction

1.1 Scope of application
These instructions apply to the following Siemens SITRANS FC products:
▪ SITRANS FC1x0
▪ SITRANS FC6x0
▪ SITRANS FC7x0
▪ SITRANS FC5x0
▪ SITRANS FC Spare transmitter and Spare sensor.

1.2 Target group

The following persons are the target group of this manual:
▪ Technicians
▪ Engineers
This manual along with its applicable documents enables the target group to complete
the following steps:
▪ Installation
▪ Commissioning
▪ Configuration (parametrization)
▪ Integration of the flow meter into a process control system
▪ Troubleshooting
▪ Maintenance and repair
▪ Replacement (sensor and transmitter)
▪ Dismantling and disposal

1.3 Document history

The following table shows major changes in the documentation compared to the previous
edition.
Edition
09/2023

1.4 Product compatibility

The following table describes compatibility between manual edition, device revision,
software and firmware revision.
Manual
edition
09/2023 Initial release S1.01 or later
Remark
First edition
Remarks Hardware
revision
Main software Sensor
revision software
revision
R4.01.01 or R1.01.04 or
later later
A5E52748387-AA, 2023/09
FC7x0
Introduction
Indicator
software
revision
R4.01.01 or
later
R4.01.02 or
later
7 / 180