Chapter 3 Reflectometry measurements
FTTH-SLM Software option
Figure 73
FTTH OTDR Setup
FTTH setup
In the first screen, configure the following parameters:
Laser
The acquisition will be carried out on the wavelength(s) selected (for
multiple-wavelength modules). In case of a multi-wavelength module,
select All to perform a measurement for all the wavelengths available (this
parameter visible exclusively on modules with one single OTDR port). The
possible values depend on the module used.
•
OLT: Optical Line Terminal (switch at the Central Office)
•
ONT: Optical Network Terminal (media converter and gateway in the
Home)
148
User Manual
78000010220 Rev. 023