Activate The Bbs Source On T-Berd/Mts 6000; Perform The Cd/Ap Referencing On T-Berd/Mts 8000 V2 - Viavi 8100 V2 Series User Manual

Chapter 16 Fiber Characterization
Referencing the test functions
2 Wait for the self calibration process of the DISPAP module (~1min.).
3 Press the hard key R
4 Press the soft key

Activate the BBS Source on T-BERD/MTS 6000

Once the T-BERD/MTS 6000 is switched on:
1 On the Home page, select BBS icon
2 Press R
3 Click on BBS tab.
4 Click on menu key
5 Press S
Perform the CD/AP referencing on T-BERD/MTS
8000 V2
1 Click on CD or AP tab and press S
2 Click on Ref Acq.
3 Select Make Reference to Yes.
4 Press Yes to confirm making a new reference..
5 On the parameter BBS Serial Number, enter the BBS module serial
number using the numerical keyboard and validate.
NOTE
The serial number is displayed in the About page of the Platform
(H
6 Press the soft key
484
ESULTS
hard key.
ESULTS
/S hard key to activate the BBS.
TART TOP
> About).
OME
User Manual
and touch the MTAU tab.
until OUT B is selected
to select CD or AP.
ETUP
to enter in the reference menu.
to exit the reference menu.
78000010220 Rev. 023
.
.