Opening A Report - Viavi 8100 V2 Series User Manual

Chapter 3 Reflectometry measurements
Saving the trace(s) and generating a report
• If in the File Setup page (S
is defined with All Traces, one single .msor file and one single txt/pdf
report will be generated, bringing together all traces.
Example: if 3 traces are displayed in overlay, one single .msor file
and one single txt/pdf file (with one trace per page; except if the
results table is too long for one page) will be saved.
Adding a logo to a pdf report
To display a logo (or any other image) on the upper left part of the report:
1 Reach the System Settings screen (H
2 In the Printer menu, select File (Formatted)
3 In the Logo parameter, enter the full path of the image file (with file
extension)
Example: disk/Logo.jpg
4 Click on
5 Press F
must be generated.
6 Launch the report: follow instructions from
Once report is generated, the logo is displayed on the upper left part
of the page.

Opening a report

1 To open the report, press F
2 In the Explorer page, in the directory selected, select the file/report.
The file name is:
For the txt file: trace file_sor.txt
For the pdf file: trace file.sor.pdf
114
Exit to return to
and in the Explorer, open the file for which a pdf report
ILE
User Manual
> File), the parameter File Content
ETUP
OME
Home page.
hardkey
ILE
78000010220 Rev. 023
> System Settings)
step 1 on page 111