Download
Share
Print this page
Viavi OneAdvisor 800 Manual
  1. Manuals
  2. Brands
  3. Viavi Manuals
  4. Test Equipment
  5. OneAdvisor 800
  6. Manual
Viavi OneAdvisor 800 Manual

Viavi OneAdvisor 800 Manual

Oran odu emulation
Hide thumbs Also See for OneAdvisor 800:

Advertisement

Quick Links

Download this manual

Table of Contents

1.
Scope ......................................................................................................................................................... 2
2.
OneAdvisor Overview ................................................................................................................................ 2
2.1
ORAN ODU Emulation ...................................................................................................................... 2
2.1.1
Initial Setup .................................................................................................................................. 3
2.1.2
ORAN ODU Emulation Testing - M-Plane RU Query ................................................................... 4
2.1.3
ORAN ODU Emulation Testing - S and CU-Plane RU Transmit .................................................... 9
3.
Technical Support .................................................................................................................................... 14
ORAN ODU Emulation
OneAdvisor 800
Page 1 of 14

Advertisement

loading
Need help?

Need help?

Do you have a question about the OneAdvisor 800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Viavi OneAdvisor 800

Summary of Contents for Viavi OneAdvisor 800

  • Page 1: Table Of Contents

    ORAN ODU Emulation OneAdvisor 800 Table of Contents Scope ................................. 2 OneAdvisor Overview ..........................2 ORAN ODU Emulation ........................2 2.1.1 Initial Setup ..........................3 2.1.2 ORAN ODU Emulation Testing – M-Plane RU Query ..............4 2.1.3 ORAN ODU Emulation Testing – S and CU-Plane RU Transmit ............ 9 Technical Support ............................

  • Page 2: Scope

    1. Scope This document describes how to configure the OneAdvisor for ORAN ODU Emulation, including: O-RU Connectivity M-Plane Results S-Plane Results VSWR Results The required products and parts to complete this procedure are as follows: Description Diagram OneAdvisor with the following functions: ONA-800 mainframe equipped with the following module/Firmware/Licenses: o SPA06MA-O: SPA Module with Optical Board...

  • Page 3: Initial Setup

    2.1.1 Initial Setup The following procedure describes the initial setup of ODU Emulation analysis, including turn-up and connectivity. Step Action Description Power ON OneAdvisor Press and hold the ON/OFF button for 3 seconds to power on the One Advisor Connectivity: - Insert the SFP+ into Port 1 on the optical board - Inspect, Clean, and connect a...

  • Page 4: Oran Odu Emulation Testing - M-Plane Ru Query

    Step Action Description ORAN ODU Emulation mode: - Select {Home}, {Tests}, {Radio Analysis}, {O-DU Emulation} ORAN ODU Emulation Measurement Mode ORAN ODU Emulation Measurement Screen 2.1.2 ORAN ODU Emulation Testing – M-Plane RU Query The following procedure describes the steps to perform ODU Emulation tests with OneAdvisor. Step Action Description...
  • Page 5 Step Action Description Verify the O-RU Address Mode is set to DHCP Setting IP Address and VLAN Information Start the ODU Emulation Process: Turn ON the ONA Laser Select the M-Plane tab If the RU is powered and connected there will be green lights on the Summary area of the screen Connect to the RU:...
  • Page 6 Step Action Description Reading the RU Data: The User Interface has two results screens that can be changed as If operating properly, the desired. Click in the header to change either screen. radio should be attempting to communicate through VLAN IDs 201 to 210.
  • Page 7 Step Action Description O-RU General > SFP Information (below) O-RU M-Plane > Capability (below) Page 7 of 14...
  • Page 8 Step Action Description O-RU M-Plane > Bands (below) O-RU M-Plane > Delay Profile (below) Page 8 of 14...

  • Page 9: Oran Odu Emulation Testing - S And Cu-Plane Ru Transmit

    2.1.3 ORAN ODU Emulation Testing – S and CU-Plane RU Transmit The following procedure describes the steps to perform O-DU Emulation tests with OneAdvisor. Step Action Description Reading the RU Data: After about 3 minutes the RU will respond to the ONA The PTP and SyncE buttons will activate...
  • Page 10 Step Action Description capabilities. Always transmit in Dish owned spectrum) Center Frequency of Carrier RU TX POWER - Set TX Power to lowest allowed by the RU Carrier Power - Press the menu button to exit Exit Settings Push Configurations to the - Press the PTP button to push the config to the - Press the SyncE button...
  • Page 11 Step Action Description PTP Sync Status Turning on the Carrier When you have your measurements Turn Off the carrier TX OFF TX ON The following screens ORAN Results Categories and Sub-Categories are available from the O-RU S-Plane – SyncE (Below) O-RU S-Plane –...
  • Page 12 Step Action Description O-RU Specific > VSWR (below) Save a Report - Press Save - Enter a file name - Select Report as the File Type and then click on Report Set-up - Add any additional descriptive information to the fields available here - Click Apply - Then Click Save...
  • Page 13 Step Action Description Page 13 of 14...

  • Page 14: Technical Support

    3. Technical Support Technical support is provided by: Phone: 1-844-GO-VIAVI (1-844-468-4284) options 3-2-3 § Email: diagnostics.tac@viavisolutions.com § Regularly new firmware updates for the CellAdvisor 5G are released and it is recommended to keep the instrument in the latest firmware to provide all the enhancements and bug fixes.