Viavi ONA-800 Setup
Tablet interference advisor setup
Hide thumbs
Also See for ONA-800:
- Getting started manual (75 pages) ,
- Software update instructions (15 pages) ,
- Quick card (3 pages)
Related Manuals for Viavi ONA-800
Summary of Contents for Viavi ONA-800
- Page 1 TABLET INTERFERENCE ADVISOR SETUP FOR THE: ONA-800 AND CA5G CONNECTIONS SETUP Phone Setup Description Band Forcing Force the mobile to a band that you are NOT hunting interference on. Turn ON the mobile’s Hot Spot...
- Page 2 ONA-800 Description Setting Up Wi-Fi Connect the proper Bandpass Filter as shown above Power On the ONA-800 System icon Network icon WI-FI icon Enable wireless adaptor Select the Mobile Hotspot Enter the Password if needed Note the IP Address (xxx.xxx.xxx.xxx)
- Page 3 Setting up Amp/Scale Press the Set the Reference level (Ex. -90.00 dBm) Set the Scale/Div (Ex 5dB) NOTE – The above settings allows for a sensitive spectrogram (-90 to -140) Set the Atten to 0 dB Turn on the Preamp Press the Return tab Setting up BW/AVG Press the...
- Page 4 Starting a Recording Press the Back Arrow Press the to start recording Press the to stop recording Press the button to save the recording Press the button to stop the recording Changing Views At any time press the button to change views...
-
Page 5: Directional Antenna
Directional Antenna Description Connecting the Antenna to the Cell Advisor Connect the directional antenna as pictured below Launching Radar Chart Mode icon Interference Analyzer Radar Chart (Soft Key) Select Done Measurement Setup icon Screen Mode Calibrating the Antenna Place Antenna in horizontal position and do not move handle Handle Initialize Antenna Advisor (Under Screen mode) Making Initial Sweep...
Need help?
Do you have a question about the ONA-800 and is the answer not in the manual?
Questions and answers