Moving the cursors
To move the cursor(s) on the trace:
1
Press soft key
2
Use the direction arrow keys
or
Touch the spectrum display at the location where the cursor must be
positioned.
The coordinates of each cursor intersection with the trace are indi-
cated above the trace.
Zoom on trace
In order to zoom in on the trace:
1
Press the
Zoom/Shift
2
Use the direction keys
or vertically.
or
Use the touchscreen to position upper left and bottom right location
of the zoom area
The zoom is made around the selected cursor(s).
NOTE
To reset the zoom and see the full trace, press
Trace shift
To shift the trace horizontally or vertically:
1
Press the
Zoom/Shift
Cursor
A / Cursor B menu key,
menu key to select Zoom.
/
soft key to select Shift function.
User Manual
Chapter 10 I-PMD Measurement
/
or
/
to zoom in either horizontally
78000010220 Rev. 023
Display of results
Full
scale.
373