Type Of Display - Viavi 8100 V2 Series User Manual

Type of display

The table may be displayed in a single line, on half of the screen or the
whole screen as a function of the Trace/Table key (see
on page 299)
Contents of the table with statistics
When selecting the Statistics measurement mode and multiple acquisitions
are performed, statistics are calculated on the results. To display these
results in the table,
1 the number of the channel
2 the frequency or the channel wavelength
3 the min. frequency or the channel wavelength
4 the max.frequency or the channel wavelength
5 the level of the channel in dBm
6 the min. level of the channel in dBm
7 the max. level of the channel in dBm
If the option "Osa Edit Table" is released more further more statistics are
available by using the User Defined Tables
Successive addressing of channels according to the sort
type selected
On the trace and in the table, it is possible to move the cursor from one
channel to the next in the selected sort order. To do this,:
1 Use the key
used on the trace.
2 Press the
select the parameter Table Contents to Statistics.
,
Cursor A/Cursor B
Channel key
User Manual
Chapter 8 Optical Spectrum Measurement
to choose the cursor A or B to be
78000010220 Rev. 023
Table of results
"Trace /Table key"
307