Traces Display In Double Acquisition Mode - Viavi 8100 V2 Series User Manual

Chapter 3 Reflectometry measurements
Results display
1 Press the Trace key
2 Press the direction keys
necessary, until the active trace is displayed in green.
or
Click on the trace numbers in the upper right side of the
result page until the trace desired is selected.
or
Click on the upper part of the screen, in Trace information zone to
scroll the traces.
NOTE
Actions relative to traces (move cursors, events...) are exclu-
sively done on the active trace (in green), not on the other ones.

Traces display in double acquisition mode

When a double acquisition has been performed, i.e. a short acquisition
preceding a standard one (see
mode)" on page
90
"Smart Acquisition (not available in Multi-
37), two traces are displayed in the same window.
User Manual
and , as many times as
78000010220 Rev. 023
traces