Configuration In Test Auto Mode - Viavi 8100 V2 Series User Manual

Standard
Consolidated in multi-traces display, one report page is generated for all
Report naming
Select Report naming parameter and press the right arrow key to modify
the name of the report file for the result trace.
In the edition keypad, enter a name manually for the file and press Enter to
validate.
Include Microscope Image
In the report page, an image of the scope test result can be displayed on
the upper part of the report. Select Yes to include the scope test result
image into the report.
NOTE
This parameter is not available if the report format selected is a
Txt file.

Configuration in Test Auto mode

The Test Auto
and display of results defined as default settings in factory.
A
CQUISITION
in multi-traces display, one report page is generated for
each trace.
traces
key imposes the parameters for acquisition, measurement
Acquisition
User Manual
Chapter 3 Reflectometry measurements
Configuring the reflectometry test
Laser
Acquisition
Time
Smart Acq
78000010220 Rev. 023
All
Auto
Auto
No
59