Loading An Existing Project - Viavi 8100 V2 Series User Manual

The project file (.prj) contains Acquisition / Alarms / Link / File param-
eters and is saved in root disk or Harddisk under cable_co > OTDR
directory.
A directory is automatically generated with the project name, and it is saved
under disk > cable_co > OTDR. Measurements are stored into this
directory, as well as a summary text file.
NOTE
Once a project is created, the parameters cannot be modified
except the acquisition ones.

Loading an existing project

To open the project just created or to load an existing project:
1 Press the Load Project soft key on the Setup screen
2 Select the project file to be used (.prj) in disk > cable_co > OTDR
directory.
3 Press Load Project softkey.
Figure 85 Loading a project
Recall of the
Cable Project
parameters
A summary table of all fibers and measurements is displayed.
User Manual
Chapter 3 Reflectometry measurements
78000010220 Rev. 023
Smart Link Cable Option
.
167